Introduction
Crystal Industrial’s High Pressure Access Systems from India are specific pipe arrangements which allow inward access to manufacturing plant vessels and pipeline working in full process conditions. The corrosion observing industrial standard for such access systems depends on a 2-inch bore outline.
At the point when utilized with Crystal Industrial’s Retrieval Tool and Service Valve, high pressure access systems permit the establishment and recovery of corrosion observing coupon holders, probes, chemical infusion instruments and different gadgets to be performed securely and without plant closure, at operating pressures up to 3600 psi.
Crystal Industrial from India provides a wide variety of access fitting assemblies for establishment of corrosion probes and weight reduction coupons. The product variety contains both the customary mechanical system and also the hydraulic system – manufactured by Crystal Industrial from India.
Crystal Industrial’s Mechanical Access and Retrieval System from India
This system is completely meant for placing and recovering probes and coupons from high pressure pipage, piping and vessels under full working pressure. Highest working temperature is 204 °C (400 °F).
Crystal Industrial’s Mechanical Access Products are congenial and exchangeable with industrial standard products additionally provided by different merchants.
Crystal Industrial’s Mechanical Access and Retrieval system from India includes the below mentioned components:
- High pressure mechanical access fitting.
- Mechanical solid and hollow fittings.
- Heavy duty protective covers for mechanical system.
- Mechanical recovery device.
Crystal Industrial’s Mechanical Access System from India is likewise accessible for infusion and sampling applications (Tee type fittings).
Crystal Industrial’s Mechanical Access Fittings from India has an ACME threaded outlet to connect with the service valve of the mechanical recovery device system. The Mechanical Access Fitting has a threaded attachment with the solid/hollow plug. A protective cover is utilized for security of the outer ACME threaded segment.
Crystal Industrial’s Mechanical Access Fitting from India is obtainable in different versions.
Mechanical Access Fittings are fabricated in Stainless steel as standard materials (other materials accessible on demand).
Crystal Industrial’s Mechanical Access Fittings from India conform to NACE MR0175 (sour service) prerequisites. NORSOK description available upon demand. PED compliance accessible.
Application
Once the fitting is connected to the line, it functions as the channel through which hot tapping and swabbing can be carried out. After the line is effectively “tapped in”, observation apparatus can be exposed to the process flow by utilizing Crystal Industrial’s Retriever and Service Valve to establish either a Solid or Hollow plug, to which observation apparatus can be connected. Once placed, the plug closes the fitting to maintain line integrity.
Crystal Industrial’s Fittings from India can be positioned at any place on-line that local working conditions allow. Trap fittings are normally mounted below the line and collect samples of the fluids and deposits present along the line base. Observing through traps simulates the destructive environments of stagnant areas that may be present in the line.
Crystal Industrial’s Tee type access fittings from India
The tee on the access fitting generally has NPT threads so that a shut off valve and a nipple can be connected. Whenever needed, the tee on the access fitting body can be closed with a pipe plug. The fitting will then function as a standard non-tee fitting, allowing the utilization of corrosion coupons, hydrogen probes or electronic probes.
If the tee is fixed with a pipe plug, the tee outlet can’t be utilized again until the system has been decompressed. The height of the access fitting body is expanded to suit the tee, and must be considered while computing the length of the injection/sampling tube or injector.