Crystal Industrial’s Access Fitting Assemblies from India

Crystal Industrial’s Access fittings from India have female threads inside that get either a solid or hollow male threaded connection. The Threaded access fittings are advantageous in applications where the process incorporates solids and scrap. Crystal Industrial’s Access Fittings from India that are placed on base of-line are especially vulnerable to solids getting accumulated in the threads of the fitting assembly. Threads have unsmooth strings with a greater pitch and a little angle than the standard v-strings. This aids to prevent the connect assembly from getting fixed to the access fitting due to scrap stuck in the middle of the threads.

Crystal Industrial’s Severe Service Access Fittings from India have an authorized corrosion resistant insert to resist severe applications. By using an injector made of a strong material, the seal seat areas and strings are protected from destructive corrosion.

Consequently, as a cathode in a galvanic cell, it passes extremely low current. This propensity and the immense anode-to-cathode area ratio rule out the possibility of galvanic corrosion. Just for non-tee access fittings.

Crystal Industrial’s Service Kits from India

Customary servicing of access fittings is important to ensure safe installation and retrieval of corrosion analyzing and chemical insertion devices. Crystal Industrial from India recommends the bearer plug (strong/empty) to be replaced after three insertions or if damaged. A basic sealing must be replaced after each service, and for a solid carrier plug, the ancillary O’ ring seal if it is damaged or impaired to a great extent. Crystal Industrial’s Service units from India provide the crucial new components for regular service of each access fitting region.

Crystal Industrial’s Retriever and Access Fitting System from India

Proper positioning of probes and coupons is essential for good assessment results. The small size of the retriever gadget allows greater flexibility in selecting the best examination regions. The system can similarly be retrofitted to present mechanical fittings with use of a connector, making it realistic to re-use damaged fittings from inside.

The blend of safety attributes and limited size perceives Crystal Industrial Retrieval System from India as the most tried and true and user friendly recuperation instrument accessible – and the favored determination of customers around the globe. The system is secured by worldwide licenses held by Crystal Industrial from India.

System Advantages

• More safe for operators.
• No external moving parts – diminished threat of accidents and injuries.
• Improved protection with twofold service valve.
• Enhanced safety in sour service. Least size and operational region requirement in the market.
• Increased flexibility in selecting the best examination regions.
• Simple and more safe to use than heavy mechanized systems.

Designed for full line pressure

• No internal threaded connections in retriever tool cylinder.
• Reliable process irrespective of the likelihood that particles/sand are present in the stream.

More environmental friendly

• Less than 50 percent of the discharge of traditional systems.
• Available with threaded injectors, mixed brass head screws and PVC gasketing.
• Stainless steel screws are obtainable upon request.

The system includes:

• Fittings, connections and covers.
• Service Valves.
• Hydraulic Retrievers.
• Accessories, for instance, vacuum apparatus for quick retrievals.

Crystal Industrial from India has built up a line of licensed interior corrosion observing access fittings. By utilizing an injector, the seal seat regions and threads are shielded from corrosion harm. Crystal Industrial from India uses a solid passive film making material. Subsequently, as a cathode in a galvanic cell, it has a tendency to pass extremely low current. This propensity and the extensive anode-to-cathode zone proportion rules out the possibility of galvanic corrosion.

These inward corrosion observing fittings were subjected to thorough individual testing by a reputed Middle East oil organization and their test outcomes have proven the benefits of this design.

Crystal Industrial’s Access Fitting Assembly from India is the key concept of “Access under pressure—at any time, and any place”. When used with a Crystal Industrial’s Retriever and Service Valve from India, the Access Fitting Assembly permits safe, easy insertion and retrieval of corrosion and abrasion checking equipment and preventive maintenance devices for injecting inhibitors or for scrutiny, amid full working pressure. The Crystal Industrial’s Access fitting body from India is intended to be welded directly to the piping or vessel. Crystal Industrial’s erosion access fitting from India contains a radius to adjust the curvature of the piping or vessel, with a weld opening. It moreover contains a thick body to provide adequate branch reinforcement region to strengthen the weld joint. It is the most popular kind of erosion fitting mounting outline.

Crystal Industrial’s Retractable System from India provides safe and restrained insertion and removal of probes, sensors and injection devices at high compressions. This is an efficient gadget for corrosion observing system. Your chemical injection systems and corrosion coupons will be protected and maintainted.

Crystal Industrial’s Access Fitting General Assembly

Crystal Industrial’s Access Fitting Assembly from India contains two significant parts: (1) the Body; and (2) the Plug Assembly. A protective cover and sleeve are obtainable and recommended for all applications. Optional side tee configurations are additionally acquirable when chemical transfusion or fluid testing is required.

Crystal Industrial’s Access Fittings from India

Side Tee for Chemical transfusion

At the point when insertion of treatment chemicals or investigating of the procedure is required it is desirable to use an access fitting with side tee. They are also used with sand monitoring probes. Tee fittings incorporate an NPT threaded outlet on the side of the fitting body. The connection of a tee adds approximately 1 to 3 inches to the length of the standard access fitting according to the width and rating.

Crystal Industrial’s Retriever and Access Fitting System from India

Coupons and probes are usually placed in high pressure flowlines and vessels to provide vital information on surface erosion, sand creation or other internal conditions. Installing and retrieving these devices under pressure represents a potential hazard for the administrator, so safe instruments and extensive training is required.

Crystal Industrial’s Retrieval System from India provides a protected and effective technique for retrieving coupons and sampling probes through access fittings under full working pressure.

General System Description

In the Crystal Industrial’s Retrieval System, the probe/coupon holder is joined to a hollow or solid plug, which is situated in an access fitting. A heavy-duty sealing holds the fitting in position while operation, and an alignment of 4 locking pins holds the fitting in place during retrieval operations. Installation and retrieval of the connection/probe assembly under pressure is effortlessly done by pumping the attachment in and out of the access fitting using the twofold acting retrieval tool.

Crystal Industrial’s Retrieval and Access Fitting System from India, as compared to the customary mechanical gadgets, gives a substantially more prominent level of safety through hi-tech attributes like no external moving parts, no internal strung connections and small, lightweight structure.

Crystal Industrial’s standard high pressure access fitting from India gives access to systems under full working pressures, ruling out any requirement for system close down to acquire important corrosion information.

This fitting comes in various mounting designs, giving administrators the adaptability to choose the ideal area on the basis of the kind of monitoring required and any area-specific attributes, (for example, height clearance) that should be considered.

The tee access fitting body accompanying the solid plug assembly and insertion sampling nut contain Crystal Industrial’s high pressure injection/sampling system. The tee configuration permits a product to be infused into the system, either persistently or intermittently, and enables the administrator to take liquid specimens.

Application

Once the fitting is connected to the line, it functions as the course through which hot tapping and swabbing can happen. After the line is effectively “tapped in”, observing instruments can be exposed to the operative stream by utilizing the Crystal Industrial’s Retriever and Service Valve to establish either a Solid or Hollow fitting, to which observing apparatus can be joined. Once placed, the plug closes the fitting, hence keeping up line integrity.

The tee on the access fitting generally has NPT threads so that a nipple and shut off valve might be connected. Whenever needed, the tee on the access fitting body can be closed with a pipe plug. The fitting will at that point function as a standard non-tee fitting, allowing the utilization of corrosion coupons, hydrogen probes or electronic probes. If the tee is fixed with a pipe plug, the tee outlet can’t be utilized again until the point that the system has been decompressed. The height of the access fitting body is expanded to incorporate the tee, and must be considered while computing the length of the injection/sampling tube or injector.

Fittings can be positioned at anyplace on-line that local working conditions allow. Trap fittings are ordinarily mounted below the line and collect specimens of the fluids and deposits that are present along the line base. Observing through traps simulates the destructive conditions of stagnant areas that may be present in the line.

Crystal Industrial’s Access Fitting Accessories for Injection/Sampling System

An injection/sampling system requires the following apparatus:

1) Tee Access Fitting Body.
2) Solid Plug Assembly.
3) Injection/Sampling Nut.
4) Injection/Sampling Tube (and nozzle where pertinent).
5) Nipple
6) Shut Off Valve.

Crystal Industrial’s injection/sampling nut restrains the injection/sampling tube in a location where it can give extremely efficient dissemination of the injection liquid. The o-ring on the nut closes the interior bore of the access fitting so that the infusion liquid can just go through the tube. This ascertains that the infusion liquid is conveyed only to the desired point of utilization.

The injection/sampling nut is clinched in position by a solid plug assembly. The solid plug assembly can be recovered under pressure accompanying the nut and tube. This allows the administrator to check or modify the injection/sampling system without depressurizing the system first.

All of the Crystal Industrial’s injection/sampling apparatus conforms to Sour Service descriptions. Standardized valves are evaluated for extremely high operating pressures. Standardized valves have a straight-through stream passage.